iCSee Camera FAQS

iCSee Camera FAQS

How do I connect to Wi-Fi?

Go to Settings > Connections, then tap Wi-Fi. If Wi-Fi is off, you can turn it on by tapping the slider button. You can also turn it on by swiping down from the top of the screen and tapping the Wi-Fi icon in the quick settings panel.

How do I connect to a mobile network?

Tap Mobile network, then tap Network operators. You’ll see a list of available networks. Select one and tap Connect to connect. If you don’t see your preferred network, tap Search networks, then tap Search again if necessary until you see your preferred network in the list of search results. Tap Network operators again, then select your preferred network from the list of search results and tap Connect to connect.

What is Do not disturb?

Do not disturb silences incoming calls and notifications while allowing alarms to sound for a specific amount of time each day until you turn this feature off or until you turn it back on again later in the day.

What is Screen pinning?

Screen pinning lets you use only one app at a time, so nothing else can be accessed without entering a password first.

What is Screen pinning used for?

This feature is useful when you want to use an app but don’t want anyone else using it while you’re using it (for example, when watching videos). To use this feature, open an app that you want to pin to your screen, press Home , press Back , then select Pin . When you’re done using an app, press Home , swipe up from the bottom of the screen, select Unpin , or enter your PIN or password if prompted to do so before exiting the app completely. QQ MYFLIX User Guide MYFLIX User Guide

The direct connection mode appears to be disconnected and the video preview freezes?

1.The disconnection problem is mostly caused by the program being too old, you can check it after updating the version of the device

2. If the wifi signal is too weak, the mobile phone and the device should be placed closer to check (test can be tested in the range of 1-2 meters)

3. If the mobile phone’s main frequency is too low, confirm that the mobile phone’s cpu frequency should not be lower than 1G or switch to smooth image quality

4. App Local configuration-decoding strategy-hard decoding Hard decoding needs to be supported by Android 4.1 or above

What should I do if the ICSEE camera cannot be connected to the router?

1. Whether the WiFi network is normal (you can connect to wifi with your mobile phone to test);

2. Whether the device has entered the connected state (the indicator light flashes red quickly);

3. Is the WiFi password entered correctly?
4. The distance between the device, router, and mobile phone is closer (the test is recommended to be in the range of 1-2 meters)

5. Confirm the router configuration

a.5G WIF is not supported, dual-band routers need to close the 5G frequency band);

b. Routers that do not support connection to enterprise-level security protocols;

c. Wi-Fi launched by modems (commonly known as cats) is not supported;

d. Close AP isolation;

e. Does not support network bridging;

f. Whether WiFi has been hidden?

g. The frequency band bandwidth is changed to 20MHz;

h. Router restart


After confirming the above information, restore the router and device to pair again

What should I do if I forget the password of the ICSEE camera?

Find the reset button or reset hole on the device, press and hold the reset button for more than 3 seconds or poke the reset hole with a needle for 3 seconds, the device will restore the default and restart (you need to re-pair after recovery)

What should I do if the video cannot be retrieved during playback?

1. Query whether the recording setting is normally turned on

2. Confirm the status of the TF card, which can be viewed in the disk information

3 Confirm that the current time display of the device is normal, and the recording time is obtained from the device. If the device time is abnormal, it cannot be queried normally.

How to change the language of the app client?

The app only supports Chinese and English, and the mobile client language will automatically switch with the mobile phone system language.




https://manuals.plus/newpal/icsee-camera-manual#ixzz81I7ciGQC

Comments

Post a Comment

Popular posts from this blog

The iCSee Camera Troubleshooting Guide: How to Fix Your iCSee Cam

Image
The iCSee Camera Troubleshooting Guide: How to Fix Your iCSee Cam How do you troubleshoot your iCSee cam when it’s offline, not working, not able to connect to the app, and so forth? You can depend on this guide to tell you want to do about it, thankfully. Just keep on reading to find out! Few smart home devices offer the same practical use value that iCSee/ICSEE/IcSee Cams offer. What does this mean? It’s simple. For instance, you only need to use your mobile phone and the iCSee app to set up the cameras and mount them in the right places. On that note, let’s talk about the ins and outs of  iCSee camera troubleshooting  down below. Why is my iCSee camera not working? How to Fix! Your ICSee cam might not work or be declared offline by your app if it’s not plugged in, has a damaged power cable, has dead/dying batteries if it’s wireless, or it’s not connected to your Wi-Fi. Software-related issues to Wi-Fi connection can be resolved by restart...
Read more

ICSEE TUTORIALS LED LIGHT DESCRIPTION

Image
LED LIGHT DESCRIPTION It will automatically light up when the following conditions happened. 1.The camera is in night vision mode The camera image under the night vision mode shows black and white. It will switch automatically when the environment turns dark. 2.The camera activates the motion detection mode. The LED lamp will light up automatically for 60 seconds when the person is detected. Click “ Light bulb icon” to turn on the LED light manually. Light Mode White Ligh — Activate the LED light Normal —-Activate the night vision light Double —-Smart Mode, activate the auto-induction Sensitivity  — Adjust the sensitivity of induction Lighting Time  — Adjust the LED lighting time Intelligent Vigilance  — Set up the detection mode ALARM There is a voice prompt when the camera detects movement. You can turn it offff in “Alarm Setting” > “Alarm Action” https://ic...
Read more

FAQ iCSee Camera

Image
FAQ The direct connection mode appears to be disconnected and the video preview freezes? 1.The disconnection problem is mostly caused by the program being too old, you can check it after updating the version of the device 2. If the wifi signal is too weak, the mobile phone and the device should be placed closer to check (test can be tested in the range of 1-2 meters) 3. If the mobile phone’s main frequency is too low, confirm that the mobile phone’s cpu frequency should not be lower than 1G or switch to smooth image quality 4. App Local configuration-decoding strategy-hard decoding Hard decoding needs to be supported by Android 4.1 or above What should I do if the ICSEE camera cannot be connected to the router? 1. Whether the WiFi network is normal (you can connect to wifi with your mobile phone to test); 2. Whether the device has entered the connected state (the indicator light flashes red quickly); 3. Is the WiFi password entered correctly? 4. The distan...
Read more