ICSEE TUTORIALS SHARE THE CAMERA

SHARE THE CAMERA：

1.The administrator can send the QR code and password of the camera to the other persons.

2.Scan the QR code by the administrator to share with you and add the camera.

https://icseeapp.com/add-camera/

Comments

Post a Comment

Popular posts from this blog

The iCSee Camera Troubleshooting Guide: How to Fix Your iCSee Cam

Image
The iCSee Camera Troubleshooting Guide: How to Fix Your iCSee Cam How do you troubleshoot your iCSee cam when it’s offline, not working, not able to connect to the app, and so forth? You can depend on this guide to tell you want to do about it, thankfully. Just keep on reading to find out! Few smart home devices offer the same practical use value that iCSee/ICSEE/IcSee Cams offer. What does this mean? It’s simple. For instance, you only need to use your mobile phone and the iCSee app to set up the cameras and mount them in the right places. On that note, let’s talk about the ins and outs of  iCSee camera troubleshooting  down below. Why is my iCSee camera not working? How to Fix! Your ICSee cam might not work or be declared offline by your app if it’s not plugged in, has a damaged power cable, has dead/dying batteries if it’s wireless, or it’s not connected to your Wi-Fi. Software-related issues to Wi-Fi connection can be resolved by restart...
Read more

ICSEE TUTORIALS LED LIGHT DESCRIPTION

Image
LED LIGHT DESCRIPTION It will automatically light up when the following conditions happened. 1.The camera is in night vision mode The camera image under the night vision mode shows black and white. It will switch automatically when the environment turns dark. 2.The camera activates the motion detection mode. The LED lamp will light up automatically for 60 seconds when the person is detected. Click “ Light bulb icon” to turn on the LED light manually. Light Mode White Ligh — Activate the LED light Normal —-Activate the night vision light Double —-Smart Mode, activate the auto-induction Sensitivity  — Adjust the sensitivity of induction Lighting Time  — Adjust the LED lighting time Intelligent Vigilance  — Set up the detection mode ALARM There is a voice prompt when the camera detects movement. You can turn it offff in “Alarm Setting” > “Alarm Action” https://ic...
Read more

FAQ iCSee Camera

Image
FAQ The direct connection mode appears to be disconnected and the video preview freezes? 1.The disconnection problem is mostly caused by the program being too old, you can check it after updating the version of the device 2. If the wifi signal is too weak, the mobile phone and the device should be placed closer to check (test can be tested in the range of 1-2 meters) 3. If the mobile phone’s main frequency is too low, confirm that the mobile phone’s cpu frequency should not be lower than 1G or switch to smooth image quality 4. App Local configuration-decoding strategy-hard decoding Hard decoding needs to be supported by Android 4.1 or above What should I do if the ICSEE camera cannot be connected to the router? 1. Whether the WiFi network is normal (you can connect to wifi with your mobile phone to test); 2. Whether the device has entered the connected state (the indicator light flashes red quickly); 3. Is the WiFi password entered correctly? 4. The distan...
Read more