iCSee Camera Device Network Configuration

iCSee Camera Device Network Configuration

1.User Login (Figure 1)

A. Sign Up to Login
B. Use “local login” for quick login(Not Suggested! This login will not get any alert or push message)

(Figure 1)

A. Click “sign up” and input the corresponding information.
B. Click the”Local Login”

2. Click ” + “ to add the camera (Figure 2)
3 .Click ” Set up my device to Wi-Fi “ (Figure 3)

(Figure 2) (Figure 3)

4. Go with “Next Step” to setup your WIFI (Figure 4)
5. Filled with your wifi name and password. Then ” confirm “ (Figure 5)

(Figure 4) (Figure 5)

6. Go with Device Searching to connecting with camera (Figure 6)

Attentation: Please make sure the camera is close to the phone to be connected

7. During the connection,then the camera will say“Connecting, please waiting”(Figure 7)

(Figure 6) (Figure 7)

8. After hearing “Connected succussfully” Then set password for your camera (Figure 8)

9. Setup the Name for your camera (Figure 9)

(Figure 8) (Figure 9)

10. Then you could view your camera on your phone View / operate your camera (Figure 10)

A. Alarm/Message Alert Setup (Figure 11)

  1. Please go the setting(See figure)
  2. Go to the “Alarm setting”

(Figure 10) (Figure 11)

A. Share: You could invited people to add the camera And share the video
B. Type it to view the video right now

B. Alarm setting (Figure 12)

  1. Open Alarm
  2. Choose:Alarm Action way. Photo and video taken, or Deving beep
  3. Alarm Push.You will get a alert Push.
  4. You could choose Message Ignore or Not.
(Figure 12)

C. Message:If Alarm Push have been setup as the above. Then alert message will be sent when any motion dected, You could see all push message here with details (Figure 13)

(Figure 13)

11. Type it to view the video right now (Figure 14)

(Figure 14)

A. You could press it to talk with the one
B. Playback and Snapshort are only worked When the TF card insert into the doorbell

Attention:You couldn’t hear the audio when you talk After talk you could hear the audio as usual


https://manuals.plus/newpal/icsee-camera-manual#ixzz81IAIQAnP

Comments

Post a Comment

Popular posts from this blog

The iCSee Camera Troubleshooting Guide: How to Fix Your iCSee Cam

Image
The iCSee Camera Troubleshooting Guide: How to Fix Your iCSee Cam How do you troubleshoot your iCSee cam when it’s offline, not working, not able to connect to the app, and so forth? You can depend on this guide to tell you want to do about it, thankfully. Just keep on reading to find out! Few smart home devices offer the same practical use value that iCSee/ICSEE/IcSee Cams offer. What does this mean? It’s simple. For instance, you only need to use your mobile phone and the iCSee app to set up the cameras and mount them in the right places. On that note, let’s talk about the ins and outs of  iCSee camera troubleshooting  down below. Why is my iCSee camera not working? How to Fix! Your ICSee cam might not work or be declared offline by your app if it’s not plugged in, has a damaged power cable, has dead/dying batteries if it’s wireless, or it’s not connected to your Wi-Fi. Software-related issues to Wi-Fi connection can be resolved by restart...
Read more

ICSEE TUTORIALS LED LIGHT DESCRIPTION

Image
LED LIGHT DESCRIPTION It will automatically light up when the following conditions happened. 1.The camera is in night vision mode The camera image under the night vision mode shows black and white. It will switch automatically when the environment turns dark. 2.The camera activates the motion detection mode. The LED lamp will light up automatically for 60 seconds when the person is detected. Click “ Light bulb icon” to turn on the LED light manually. Light Mode White Ligh — Activate the LED light Normal —-Activate the night vision light Double —-Smart Mode, activate the auto-induction Sensitivity  — Adjust the sensitivity of induction Lighting Time  — Adjust the LED lighting time Intelligent Vigilance  — Set up the detection mode ALARM There is a voice prompt when the camera detects movement. You can turn it offff in “Alarm Setting” > “Alarm Action” https://ic...
Read more

FAQ iCSee Camera

Image
FAQ The direct connection mode appears to be disconnected and the video preview freezes? 1.The disconnection problem is mostly caused by the program being too old, you can check it after updating the version of the device 2. If the wifi signal is too weak, the mobile phone and the device should be placed closer to check (test can be tested in the range of 1-2 meters) 3. If the mobile phone’s main frequency is too low, confirm that the mobile phone’s cpu frequency should not be lower than 1G or switch to smooth image quality 4. App Local configuration-decoding strategy-hard decoding Hard decoding needs to be supported by Android 4.1 or above What should I do if the ICSEE camera cannot be connected to the router? 1. Whether the WiFi network is normal (you can connect to wifi with your mobile phone to test); 2. Whether the device has entered the connected state (the indicator light flashes red quickly); 3. Is the WiFi password entered correctly? 4. The distan...
Read more